Kim Lighting Well Lights

Kim Lighting - Well Lights -  Lightvault® luminaires are designed to be exposed to the most abusive environment of all lighting systems. In-grade components under continuous attack from moisture, caustic fertilizers, soluble minerals, and ultra-violet radiation from H.I.D. lamps, are made from a choice of solid bronze or high strength glass reinforced composite.

Click here to check our collection of landscape lights.

For more Kim Lighting options, visit Electric Supplies Online.

Watch this Lightvault Installation video from Kim Lighting:

Visit Electric Supplies Online for more of your lighting needs.

re-post: http://www.kimlighting.com/media/video-library/

Kim Lighting Outdoor Lights

Kim products are manufactured with the latest computer automated machinery. Rigid inspection is performed by all Kim employees to assure conformance to engineering specifications. Final assembly is performed by dedicated individuals who support the Kim heritage of uncompromising quality. Kim landscape luminaires are engineered to use the latest lamp technology including halogen and compact fluorescent. This assures maximum performance with minimum energy consumption. Kim design philosophy emphasizes the creation of lighting effects and the harmony of fixture aesthetics with the surrounding landscape.

Kim Lighting - Directional Lights -  Directional Lighting for Landscape and Architecture presents many opportunities and challenges. It can produce visual impact, impart drama, and provide a sense of security. However, concealing the fixtures and eliminating glare can be difficult.

Kim Lighting - FloodLights -  Kim Floodlighting Systems are engineered to produce the specific distributions required to illuminate horizontal and vertical surfaces from minimal set-back distances, or mounting heights. This differs greatly from sports fields, where long distances (tall mounting heights) and considerable distribution overlaps are utilized. In General Floodlighting, cut-off, control of glare and special effects are not considered important design criteria. Neither of these systems produce efficient illumination for the Architectural Environment.

Kim Lighting - Well Lights -  Lightvault® luminaires are designed to be exposed to the most abusive environment of all lighting systems. In-grade components under continuous attack from moisture, caustic fertilizers, soluble minerals, and ultra-violet radiation from H.I.D. lamps, are made from a choice of solid bronze or high strength glass reinforced composite.

Focus Landscape Lighting

Focus Landscape Lighting

All fixtures and transformers are made by Focus at its own facilities in the U.S., nothing is imported. Focus offers a complete product line: fixtures, light bulbs, power supplies and accessories. 

Focus offers LED landscape lights too! For more details, click here.

Focus Landscape Lighting Fixtures are available in 12V Low Voltage and 120V Line Voltage.

Area Lighting

An indirect light source where the mounting stem is centered beneath the hat, having a large distribution of light on the ground or surface -- commonly used for driveways, isolated planters, or perimeter illumination.

Directional Lighting

Any fixture that projects light into a given direction that has aiming capabilities -- used for flood lighting (signs, walls, hedges, security) and spot lighting (flag poles, palm trees, architecture, statuary objects).

Compact Fluorescent Lighting

A soft, extremely wide angled light source used for flood/general lighting, safety and security -- offers extremely high efficiency and excellent lamp life.

Path Lighting

An indirect light source where the mounting stem is attached to the side of the hat, outputting a smaller distribution of light (compared to area lighting) commonly used for small pathways or entrances, potted plants or planters, or anywhere you need safe transition area.

Specialty Lighting

Fixtures used for special applications, including hanging, surface, underwater & step/brick lighting.

For more outdoor lights, visit Electric Supplies Online.

Main Reasons Why You Need To Install Outdoor Lights

Outdoor lighting is the landscaping trend sweeping the nation, and is one of the most dramatic improvements you can make to your landscape! Contemporary outdoor lighting systems are a smart investment.  Professionally installed and maintained outdoor lighting systems increase the safety and beauty of your home or business, while also adding resale value.

To check all our outdoor lights according to your liking or needs, click here. 

Low voltage lighting is safer to operate than their high voltage counterparts due to the fact it’s not such a high current flowing through the wires. 

For all landscape lights of various brands stop by Electric Supplies Online.

Here are some of the main reasons for installing an outdoor lighting system:

Security: Lighting can reveal dark areas in your landscape where someone might try to hide.

Safety: Outdoor lighting ensures resident and visitors can safely navigate around the property at night. No more stumbling over steps in the dark, low-voltage lighting gives you and your guests the confidence to get around after the suns gone down.

Usability: Illuminating private areas of a property allow enjoyment on in to the evening on your decks, sitting areas, and recreational spaces.  You will be able to enjoy you patios party on into the evening hours!

Beauty:  Low voltage lighting highlights the architectural elements of your home, and accentuates the features of your landscape.  We can design a dramatic lighting display lighting your focal point; a fountain, a stature, the weeping branches of your Japanese Maple tree, focus a light onto the gentle splashes of your waterfall and get more bang for your buck from the features of your landscape by being able to view them even after dusk.

Economy: Low-voltage lighting consumes about 1/3 the electricity compared to high-voltage systems and is far less expensive to install.

For more lighting options visit us at Electric Supplies Online.

re-post: http://www.livinglandscapes.net/id67.html

How To Install An AFCI

Warning: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse and test that the power is off before wiring!

It is important that the AFCI outlet is installed at the first outlet in the circuit in order to ensure downstream AFCI protection to the remaining outlets in the circuit.

For great deals on Leviton products, visit us at Electric Supplies Online. 

Before you begin, you must first identify the LINE and LOAD wires in your electrical box.

• Detach one cable’s white wire and hot wire from the receptacle and cap each one separately with a wire cap. Make sure they are from the same cable.
• Re-install the receptacle in the electrical box, attach the faceplate, then turn the power back ON and the service panel.
• Determine if the power is flowing to the receptacle. If so, the capped wires are the LOAD wires. If not, the capped wires are the LINE wires.
• Turn OFF the power at the service panel, label the LINE and LOAD wires and remove the old receptacle.

Connect the LINE cable wires to the LINE terminals

• The white wire (neutral) connects to the WHITE terminal (silver).
• The black wire (hot) connects to the HOT terminal (brass).

Connect the LOAD cable wires to the LOAD terminals

• Remove the yellow sticker to reveal the LOAD terminals.
• The white wire (neutral) connects to the WHITE terminal (silver).
• The black wire (hot) connects to the HOT terminal (brass).

Connect the ground wires (only if there is a ground available)

• Connect the bare copper (or green) wire to the grounding terminal on the AFCI

Fold wires into the box, keeping the ground wire away from the WHITE and HOT terminals. Screw in the receptacle to the electrical box and attach the faceplate.  Finally, you must test your work. If you mistakenly connect the LINE wires to the LOAD terminals, the AFCI will not reset and will not provide power to the AFCI.

• To test your work, plug a lamp into the ACFI and leave it plugged in. Turn the power ON at the service panel.
• Press the RESET button fully. If the lamp turns ON and the indicator light turns ON, the AFCI has been installed correctly.
• Press the TEST button (then the RESET button) every month to assure proper operation.

For more of your electrical needs, visit us at Electric Supplies Online. 

re-post: http://blog.leviton.com/how-install-afci

Back Wiring vs. Side Wiring

Did you know you can back wire or side wire a Leviton electrical device such as a wall outlet, light switch, motion sensor or GFCI? Note - Not all devices have both options available. 

For great deals on Leviton products, stop by Electric Supplies Online.

When stripping wires, use the gauge shown on the back of the device to measure the correct length. Enough wire needs to be stripped so there is no insulation under the screw head.

Back Wiring

Back wiring a device is when the wires (Black, white, green, etc.) are slid under the terminal clamp to the appropriate screw.

Side Wiring

Side wiring a device is when the wires are attached using the side terminal screws. To do this, use a pair of pliers to bend the wire, creating a “fish hook", and place the hook around the appropriate screw. Tighten the screw so it holds the wire firmly in place.

Visit us at Electric Supplies Online for more of your electrical needs.

re-post: http://blog.leviton.com/back-wiring-vs-side-wiring

RAB Lighting Wallpack: WP1FCSN35

RAB Lighting WP1FCSN35 High Pressure Sodium Small HID Wallpack Wall Mount Fixture Full Cutoff 35 Watts 120V Bronze

Visit us at Electric Supplies Online for more RAB Lighting Options. 

Features:

• Photocontrol mounting hole
• Precision die cast aluminum housing with durable polyester powder coating
• Easy access conduit openings & ballasts for fast internal wiring
• Long life lamp included
• Silicone gasket remains in place during relamping
• Cutoff Glare Shield for "Friendly" Lighting
• Hinged door swings open and remains captive for easy relamping
• Also available in white: WP1FCSN35W

For RAB Lighting Wallpacks, click here. 

Additional Features:

• Lamp Watts: 35
• Lamp Type: ED17
• Lamp Base: Med
• Ballast: R-NPF 120V
• Input Watts: 46
• Lamp ANSI: S76
• Initial Lumens: 2,000
• Lamp Hours: 24,000
• LED Replacement: WPLED13

Save Energy, Save Money with LED Replacements! For more details on the WPLED13, click here. 

Visit us at Electric Supplies Online for more of your lighting needs.

re-post: http://www.rabweb.com/product.php?product=WP1FCSN35

Westinghouse's Hadley Ceiling Fan

Hadley 42-Inch Reversible Four-Blade Indoor Ceiling Fan

Oil Rubbed Bronze Finish with Two-Light White Alabaster Glass Bowl 

Visit us at Electric Supplies Online for more ceiling fan options.

Add a touch of traditional sophistication to your home with the Hadley indoor fan 7200400. With its oil rubbed bronze finish, stepped white alabaster glass bowl and reversible applewood/cherry blades, this ceiling fan can serve as an elegant focal point for any small room. The fan's hugger mount style is perfect for rooms with lower ceilings. Its two-light fixture provides broad illumination for small indoor spaces.

For more of Westinghouse Ceiling Fans, click here.

This ceiling fan utilizes a silicon steel motor with triple capacitor to provide powerful, quiet circulation. Run the ceiling fan counterclockwise to stay cool in the summer, or run it clockwise to recirculate warm air and eliminate cold spots in the winter.

Looking for more Westinghouse products? Visit us here.

What's Included

Ceiling fan, pull chains and 12-inch lead wire.

Product reference number 72004

FEATURES

• 42-inch two-light indoor ceiling fan with four reversible blades
• 153-by-10-millimeter silicon steel motor with triple capacitor for powerful and quiet air circulation
• Three fan speeds (high/medium/low)
• Reversible switch to help keep you comfortable year-round

FINISH DETAILS

• Reversible applewood/cherry blades
• White alabaster glass light fixture
• Oil rubbed bronze finish

INSTALLATION

• Ideal for rooms up to 144 square feet (12 by 12 feet) with standard 8-foot ceilings
• Hugger-mount design for rooms with low ceilings
• Comes with 12-inch lead wire and pull chains
• Uses two candelabra-base 60-watt G 16-1/2 light bulbs (not included)
• Not adaptable for remote control

Shop at Electric Supplies Online for more of your lighting and electrical needs.

re-post: http://www.westinghouselighting.com/ceiling-fans/42-inch-ceiling-fan/hadley-42-inch-reversible-four-blade-indoor-ceiling-fan-7200400.aspx

Satco's S9087 LED Light Bulb

Under the Satco brand, the company’s product categories include incandescent, halogen, fluorescent, HID, and LED lamps as well as hundreds of styles of builder-oriented lighting fixtures, track lighting and lamps through its showroom and electrical distributor channels. In addition, Satco offers lighting and electrical components for the retail, commercial and manufacturing trade as well as consumer products such as night lights, desk lamps and surge protectors. Satco maintains an unsurpassed understanding of the lighting industry.

Our SATCO LED Bulbs are on sale!! For more details, click here. 

Satco S9087 PAR30 LED Bulb 11W, 120V, 4000K, 40 Degree Flood Beam Spread, Medium Base

Visit us at Electric Supplies Online for more lamps and bulbs of your choice.

11PAR30/SN/LED/40'/4000K/120V/D
11 watt; LED PAR30SN LED; 4000K; 40' beam spread; Medium base; 120 volts

Features

• Solid State LED lighting

• Reflector replacement lamp

• Long life

• Energy Saver

• Dimmable

Top 3 Recommended Dimmers

• Lutron® CL Family (96-101)

• Leviton® 6674 Universal

• Lutron® MACL-153 Maestro®

UPC	045923090875
Voltage	120
Watts	11
Power Factor	0.99
Lamp Shape	PAR30
Base	Medium
ANSI Base	E26
Lamp Code	11PAR30/SN/LED/40'/4000K/120V/D
MOL In Inches	3.6''
MOD In Inches	3.75''
Initial Lumens	780
Average Rated Hours	25000
Kelvin Temp	4000
Color	Cool White
CRI	80
Beam Spread	40
Pack	12/6
Package Type	Box
ENERGY STAR	ENERGY STAR
RoHS Compliant	Yes
UL or ETL Listed	Yes
UL Classification	Damp

For more lighting options, stop by Electric Supplies Online. 

re-post: https://www.satco.com/s9087.html