Replace traditional wallpacks with LED. Same footprint. Better performance

Upgrading to LED is clean and simple. Wallpacks often leave an unsightly wall stain behind during replacement.Replace the old wallpack with the SLIM and you'll never know there was anything else there.

Medium and large SLIM wallpacks were designed to replace RAB HID wallpacks, both in size and footprint template, so upgrading to LED is easy and seamless. With up to 320W MH equivalency and 78 LPW, SLIM delivers the efficiency you want in LED. Get further savings with energy rebates.

High wattage SLIM wallpacks with glare-reducing microprismatic diffusion lens are available in standard or full cutoff versions which meets dark-sky requirements.

Hinged wiring access, bubble level for mounting and conduit entry from the back, sides and top make installation a snap. The IP65 rated SLIM's external gasket and wall standoffs have been designed to create an airtight seal, keeping water out of the fixture.

The unique design of the tight-lock gasket ensures no water or environmental elements will ever get inside the SLIM.

Print Leviton Introduces Super Duty Line of Power Packs

Leviton today announced the introduction of its new line of OPP20 Power Packs featuring the industry’s first true “fail safe” design, assuring circuit activation in power failure and emergency conditions. The four new super duty Power Pack models surpass NEMA 410 16 Amp ballast overload testing and have exceeded 1.5 million switching cycles at full load. They are ideal for a wide range of applications, including daylight harvesting, CA Title 24/ASHRAE 90.1 plug load control requirements, occupancy sensing control, and bi-level and manual switching applications.

The four new super duty Power Pack models offer a variety of application solutions including:

•The OPP20-OD1 is ideal for use in basic auto-ON/auto-OFF applications. It features an Auto-ON occupancy sensor input.
•The OPP20-OD2 is ideal for use in manual-ON/auto-OFF and auto-ON/auto-OFF applications with local switches. It features an exclusive self-detect local momentary or maintained switch input. Configurable for Auto-ON and Manual-ON occupancy sensor inputs, it is CA Title 24 Compliant and meets ASHRAE 90.1 Plug Load Control requirements.
•The OPP20-RD3 is ideal for use in auto-ON/auto-OFF and photocell only room control applications. It features an Auto-ON occupancy sensor input and is photocell-ready (switching only).
•The OPP20-RD4 is ideal for use in all the applications listed above, including the use of a photocell with a local switch and occupancy sensor. It features an exclusive self-detect local momentary or maintained switch input, is configurable for Auto-ON and Manual-ON occupancy sensor inputs and is photocell-ready (switching only). It is CA Title 24 Compliant and meets ASHRAE 90.1 Plug Load Control requirements.

Easy to install, the new Power Pack models feature versatile options for mounting and can be installed either inside or outside the fluorescent ballast cavity or junction box. The Power Packs comply with NEMA 410 requirements for electronic ballast current overload and UL/cUL 916 requirements for energy management. They feature output short protection and are factory-calibrated to the zero crossing point on the AC power curve to ensure maximum contactor life and compatibility with LED ballasts. RoHS Compliant, they are plenum-rated, meet UL 2043 standards and are backed by Leviton’s Limited Five-Year Warranty.

Legrand Introduces New Pass & Seymour Portable GFCIs

Legrand, a leading provider of electrical wiring devices and home systems, has announced the availability of their line of new Pass & Seymour (P&S) Portable GFCIs.

The new line is comprised of five models: Right-Angle Plug GFCI, In-Line Portable GFCI, Cord Set GFCI, Adapter Plug GFCI and the Box Unit GFCI. All models meet the latest requirements of the UL GFCI standard, NEC®, and OSHA 1926.404 standards and are available in either 15A or 20A models.

P&S Portable GFCIs have a rugged polycarbonate housing that is able to stand up to impact and extensive usage and provide the necessary protection in a wide-range of applications. These include power tools, high-pressure power washers, wet vacuums and grounds-keeping equipment, spas and hot tubs, vending machines and portable signs, amongst others. Both automatic and manual reset models are available.

Due to their water-resistant design the In-Line, Cord Set, Right Angle, and Box GFCIs are rated for outdoor use.

Pass & Seymour Legrand Residential Dimmers
Leandro	Harmony	LS Series	Toggle	Aumente	Rotary	Slide	Toggle Plus

How do I select the right Fantech Premium Bath Fan for my bathroom?

According to the guidelines of The Home Ventilating Institute (HVI) bathrooms up to 100 sq ft are sized at 1 CFM per sq ft of floor area. Bathrooms over 100 sq ft are sized by the fixtures in the room. Allow 50 CFM per standard tub, shower or toilet. Whirlpool, garden and jetted tubs are calculated at 100 CFM. Example: Bathroom 9’ x 7’ = 63 sq ft you require the PB100 or PBW110. Example: Bathroom 11’ x 14’ = 154 sq ft, 1 Toilet + 1 Shower + 1 Tub = 150 CFM you require the PB270-2. Note: HVI recommends that Steam Showers use a separate fan on a timer so that the fan may be shut off during shower use and then run afterwards to dry out the shower stall. For proper airflow in typical installations (when duct losses aren’t calculated) use the 0.4” WG (static pressure) rating point for the correct fan selection. Bathroom doors need to have at least ¾” clearance to the finished floor to allow for make up air.

 

What installation tips can you give me to get the most from my Fantech Premium Bath fan?

Keep the duct runs as short as practical. (under 25 feet). The inner core of Flexible Insulated Ducting should be as tight and straight as possible and sealed to the grille housing/fan/wye connector/termination with aluminum foil tape. Ensure there is a minimum of 3 duct diameters between any fitting and the inlet/outlet of the fan. For the PB270-2 and PB370-2: It is better to have a short run of larger trunk line from the wye connector to the inlet of the fan and from the fan outlet to the termination point and longer runs of smaller duct from the grille/light to the wye connector.

 

Halo Recessed Lighting 4" LED Recessed Trims

		Halo Lighting TL400 4" LED Recessed Lighting Trim, Reflector Downlight				Halo Lighting TL401 4" LED Recessed Lighting Trim, Baffle Downlight
		Halo Lighting TL402 4" LED Recessed Lighting Trim, Regressed Lens Downlight with Reflector				Halo Lighting TL403 4" LED Recessed Lighting Trim, Regressed Lens Downlight with Baffle
		Halo Lighting TLS408 4" LED Square Baffle Recessed Lighting Trim with Solite Regressed Lens				Halo Lighting TL409 4" LED Recessed Lighting Trim, Wall Wash Downlight, with Diffusing Lens
		Halo Lighting TLS422 4" LED Recessed Lighting Shower Trims				Halo Lighting 4" LED Round Adjustable Gimbal, Recessed Lighting LED Modules and Trim Combo
		Halo Lighting 4" LED Square Adjustable Gimbal, Recessed Lighting LED Modules and Trim Combo				Halo 4" LED Recessed Lighting Trims Catalog
		Halo Lighting 4" LED Adjustable Recessed Lighting LED Modules and Trim Combo

Halo LED Recessed Lighting

HALO LED H7 Collection - 600 / 900 / 1200 Series
The Halo LED H7 collection of 6˝ downlights offers three lumen packages across the 600, 900, and 1200 Series - a versatile collection of energy-efficient LED downlights for general lighting in commercial and residential applications.
HALO LED H4 Collection - 4˝ Downlight
HALO H4 LED Downlight Collection functions as a three-part system that allows the downlight housing, light engine module and trim to be installed according to the pace of the project.

		Halo Recessed Lighting 4" LED Recessed Housings				Halo Recessed Lighting 4" L.E.D Modules
		Halo Recessed Lighting 4" LED Recessed Trims				Halo Recessed Lighting 4" LED Recessed Accessories
		Halo Recessed Lighting 6" LED Recessed Housings				Halo Recessed Lighting 6" L.E.D Modules
		Halo Recessed Lighting 6" LED Recessed Trims				Halo Recessed Lighting 6" LED Recessed Accessories
		Halo Recessed Lighting 6" L.E.D Modules with Emergency Backup Connections				Halo Recessed Lighting 6" LED Recessed Housings with Emergency Backup
		Halo Recessed Lighting 6" LED Retrofit Enclosure for Existing Open Frame Recessed Housing				Halo Recessed Lighting 0-10V LED Dimming Info
		Halo 6" LED Recessed Lighting Guide				Halo 4" LED Recessed Lighting Guide

Buy American Compliant Fixtures From RAB Lighting

RAB Lighting is proud to manufacture Outdoor Lighting to comply with the Buy
American requirements of the American Reinvestment and Recovery Act (ARRA).
In addition to creating sustainable jobs, RAB creates products which focus on
Sustainable Lighting Technologies such as LED. RAB manufactures Buy American
Compliant LED Wallpacks, LED Bollards, LED Flood and LED Area lights, Poles,
Motion Sensors, Vandalproof, Vaporproof, Explosionproof fixtures, and High-bays.

Recent projects include: Warwick Township, PA selected Buy American Compliant
LED Wallpacks to conserve energy on Municipal buildings. Municipal water
treatment facilities in Moorehead City, NC and Fisherville, VA installed Buy
American Compliant Outdoor Sensors and Vaporproof fixtures to reduce their
energy consumption.

Military Projects include: energy saving fixture installations at Fort Lewis in
Thurston County, WA, Fort McCoy in Monroe County, WI and the Fort Carson
installation in El Paso County, CO.

RAB Lighting offers a complete line of high quality residential and commercial
outdoor lighting fixtures that are Buy American compliant for use on ARRA
Projects.

Slim, trim fixtures for undercabinet or shelf lighting. It’s all in the Juno Lighting family

Juno’s Pro-Series LED duplicates the light level and color of Halogen undercabinet lighting using just 1/6 of the energy and virtually no heat. And by virtue of its amazing 50,000 hour life, lamp replacement is a thing of the past…at 4 hours/day you can expect over 34 years of maintenance-free operation!

Performance Features
• Utilizes warm-white 3000K LEDs tightly binned to within 2-step MacAdam Ellipse for industry-leading color consistency
• Approximates the color temperature and work surface illumination levels of halogen using 1/6 of the wattage
• Dimmable with most incandescent, magnetic low voltage or electronic low voltage wall box dimmers.
• 70% of initial illumination at end of 50,000 hour rated life… LEDs will not burn out
• Cool to touch operation with virtually no heat on the cabinet bottom
• No UV or forward projected heat

Construction Features
• Slim 1" extruded aluminum profile
• Premium clear prismatic tempered glass lens for maximum light transmission and wipe down cleaning. Reversed angled to minimize perceived fi xture brightness
• Hinged lens captured by spring loaded retention bar can not accidently fall out
• Integral state of the art 120-volt constant current electronic driver
• Integral on/off rocker switch
• Contains no mercury
• Choice of Designer White, Brushed Silver, Brushed Bronze or Black finish

Installation Features
• Modular design for maximum flexibility and quick installation allows up to 40 fixtures to plug together using the supplied internal straight connector or optional jumper cords
• Captive external mounting screws
• Rear wireway access cover with fl ush non-metallic cable clamp and push-in electrical connectors facilitate fast wiring without having to open fixture (14", 22", and 30" only)
• Miniature die-cast fitting for flexible metal conduit, off-center knock-outs and extra mounting plate for feed-through fixture-to-fixture loop wiring increase installation versatility (14", 22", and 30" only)

Leviton LTB60-1LZ Timer Decora Preset 10-20-30-60 Minutes Countdown Timer 120VAC, 1800W Incandescent, Fluorescent and Motor Load single pole or 3-Way

Description
Decora Preset 10-20-30-60 Minutes Countdown Timer - 120VAC, 60Hz, 1800W Incandescent, 20A Resistive/Inductive, 1HP, single pole 3-way or more locations, four preset buttons for 10-20-30-60 minutes, neutral required. White assembled on device, ivory and light almond included.

Product Features
Switch Type:	Single-Pole, 3-Way
Timer Type:	Four Preset
Style Name:	Decora
Type:	Electronic
Time Range:	10-20-30-60 Minutes
Load Type:	Incandescent / Inductive
Load Rating:	1000W / 20A 1HP-120V
Voltage:	120 Volt AC 60Hz
Wire:	3
Neutral:	Required
Color:	White, Ivory and Light Almond
Standards and Certifications:	UL/CSA
Warranty:	2-Year Limited

Wiring Diagrams
Single Location Click to Enlarge	Multi Locations with Remote Switch without LED VP0SR-10Z Sold separately Click to Enlarge
Multi Locations with Remote Switch with LED VP0SR-1LZ Sold separately Click to Enlarge

Specification Sheet - PDF
Instruction Sheet - PDF

Leviton VPT24-1PZ Vizia+ 24 hour Timer 120VAC, 60HZ, 1800W Incandescent for single pole, 3-way or more locations, with astronomic clock

Vizia+ 24 hour Timer 120VAC, 60HZ, 1800W Incandescent, 15A Resistive/Inductive, 1HP, for single pole, 3-way or more locations, with astronomic clock, backlit LCD display, timer settings at a glance, green LED locator, neutral required. White assembled on device, ivory and light almond included.

Product Features
Switch Type:	Single-Pole, 3-Way
Timer Type:	Programmable Timer
Style Name:	Decora
Type:	Electronic
Time Range:	24 Hour with Astronomic Clock
Load Type:	Incandescent / Inductive
Load Rating:	1800W / 20A 1HP-120V
Voltage:	120 Volt AC 60Hz
Wire:	3
Neutral:	Required
Color:	White, Ivory and Light Almond
Standards and Certifications:	UL/CSA
Warranty:	2-Year Limited

Specification Sheet - PDF
Instruction Sheet - PDF

	Leviton VPT24-1PZ Vizia+ 24 hour Timer 120VAC, 60HZ, 1800W Incandescent for single pole, 3-way or more locations, with astronomic clock