Three ports allow conductors to remain separate, permitting the lug to provide lower resistance, therefore lower temperature and to provide longer-term reliability
|
| ||||
|
| ||||
|
|
Wednesday, October 3, 2012
Danfoss Electric Floor Heater
Danfoss LX Electric Floor Heating (Self-Adhesive Mat & Thermostat) System is an affordable luxury that brings warmth to life. It’s a proven technology that’s safe, reliable and energy efficient. The unique adhesive system saves 70% on installation time! You get even heat every time with the pre-applied heating cable. There is no fastening required, thanks to the dual-adhesive backing. Safety approved for wet locations and eliminates EMF's (electromagnetic fields). All that along with the 10 year non-prorated warranty make the LX Electric Floor Heating system a sure thing!
|
| ||||
|
| ||||
|
| ||||
|
|
Electric Heater ON SALE for winter seasons
An electric heater is an electrical appliance that converts electrical energy into heat. The heating element inside every electric heater is simply an electrical resistor. Most modern electric heating devices use Nichrome wire as the active element.
Even the most efficient central heating systems send heat up the chimney. Electric heaters are a quick and easy way to warm a chilly room. They can also help you save on your energy bills since using an electric heater occasionally during mild fall and spring days might let you skip turning on your central heat; during the winter, while allowing you to keep the central heat at a lower setting.
Electricsuppliesonline is proud to represent many reputable US brands heaters such as
| Click on the picture below to see all available heaters | ||||
 |  |  |  |  |
|
| ||||
|
| ||||
|
|
Lumark Lighting Crosstour LED Wall Mount Light ON SALE
The Lumark Crosstour™ LED Wall Pack Series of luminaries provides an architectural style with super bright, energy efficient LEDs. The low-profile, rugged die-cast aluminum construction, universal back box, stainless steel hardware along with a sealed and gasketed optical compartment make the Crosstour impervious to contaminants.
The Crosstour wall luminaire is ideal for wall/surface, inverted mount for façade/canopy illumination, post/bollard and low level pathway illumination including stairs. Typical applications include building entrances, multi use facilities, apartment buildings, institutions, schools, stairways and loading docks.
Construction: Slim, low profile LED design with rugged one-piece, die-cast aluminum hinged removable door and back box. Matching housing styles incorporate both a small and large design. Patent pending secure lock hinge feature allows for safe and easy tool-less electrical connections with the supplied lever-lock connectors. Back box includes three (3) half-inch, NPT threaded conduit entry points. The universal back box supports both the small and large forms and mounts to standard 3-1/2” to 4” round and octagonal, 4” square, single gang and masonry junction boxes. Key hole gasket allows for adaptation to junction box or wall. External fin design extracts heat from the fixture surface. One-piece silicone gasket seals door and back box. Not recommended for car wash applications.
Optical: Silicone sealed optical LED chamber incorporates a custom engineered mirrored anodized reflector providing high-efficiency illumination. Optical assembly includes impact-resistant tempered glass and meets IESNA requirements for full cutoff compliance. Solid state LED Crosstour luminaries are thermally optimized with five (5) lumen packages in cool 5000K LED color temperature (CCT).
Electrical: LED driver is mounted to the diecast housing for optimal heat sinking. LED thermal management system incorporates both conduction and natural convection to transfer heat rapidly away from the LED source. 10W models operate in -40°C to 40°C [-40°F to 104°F]. Crosstour luminaires maintain greater than 70% of initial light output after 50,000 hours of operation. Three (3) half-inch NPT threaded conduit entry points allow for thru-branch wiring. Back box is an authorized electrical wiring compartment. Integral LED electronic driver incorporate surge protection. 10W, 120V 50/60 Hz.
Finish: Crosstour is protected with a Super TGIC carbon bronze polyester powder coat paint.
Super TGIC powder coat paint finishes withstand extreme climate conditions while providing optimal color and gloss.
The Crosstour wall luminaire is ideal for wall/surface, inverted mount for façade/canopy illumination, post/bollard and low level pathway illumination including stairs. Typical applications include building entrances, multi use facilities, apartment buildings, institutions, schools, stairways and loading docks.
Construction: Slim, low profile LED design with rugged one-piece, die-cast aluminum hinged removable door and back box. Matching housing styles incorporate both a small and large design. Patent pending secure lock hinge feature allows for safe and easy tool-less electrical connections with the supplied lever-lock connectors. Back box includes three (3) half-inch, NPT threaded conduit entry points. The universal back box supports both the small and large forms and mounts to standard 3-1/2” to 4” round and octagonal, 4” square, single gang and masonry junction boxes. Key hole gasket allows for adaptation to junction box or wall. External fin design extracts heat from the fixture surface. One-piece silicone gasket seals door and back box. Not recommended for car wash applications.
Optical: Silicone sealed optical LED chamber incorporates a custom engineered mirrored anodized reflector providing high-efficiency illumination. Optical assembly includes impact-resistant tempered glass and meets IESNA requirements for full cutoff compliance. Solid state LED Crosstour luminaries are thermally optimized with five (5) lumen packages in cool 5000K LED color temperature (CCT).
Electrical: LED driver is mounted to the diecast housing for optimal heat sinking. LED thermal management system incorporates both conduction and natural convection to transfer heat rapidly away from the LED source. 10W models operate in -40°C to 40°C [-40°F to 104°F]. Crosstour luminaires maintain greater than 70% of initial light output after 50,000 hours of operation. Three (3) half-inch NPT threaded conduit entry points allow for thru-branch wiring. Back box is an authorized electrical wiring compartment. Integral LED electronic driver incorporate surge protection. 10W, 120V 50/60 Hz.
Finish: Crosstour is protected with a Super TGIC carbon bronze polyester powder coat paint.
Super TGIC powder coat paint finishes withstand extreme climate conditions while providing optimal color and gloss.
|
|
||||
|
|
||||
|
Tuesday, October 2, 2012
Markel Thermostat for Heating and Cooling Applications
A thermostat is a device that automatically controls heating or cooling equipment in such a way as to maintain a temperature at a constant level or within a specified range, generally using a thermometer capable of triggering electrical switches that activate or deactivate the equipment. Markel's range of thermostats is impressive, from the popular ET Series to the more specialized Rain Tight Washdown Series - you'll find it all here.
Honeywell Chosen by Consumers as the Overall Best Brand of Programmable Thermostats in the United States
Honeywell conducts extensive – and on-going – customer research to ensure the products they develop are simple-to-install and are easy-to-use. For instance, their Prestige programmable thermostat incorporates a patented, interview-based interface that walks a homeowner through the set-up process by asking a series of questions, such as “what time does the first person wake-up in the morning?” or “what time do you go to sleep at night?” The answers help the thermostat program itself – no owner’s manual is needed. The graphic user interface displays information in an easy-to-understand format, the on-board user’s manual provides definitions and directions for each display screen and can be customized to display in English, French or Spanish.
Some Honeywell programmable thermostats also have the ability to wirelessly communicate to accessory devices using the company’s RedLINK™ technology, the first wireless protocol developed exclusively for the HVAC industry. The thermostat can be used with an outdoor sensor that sends a signal to the thermostat to display outdoor temperature and humidity on the home screen. This makes it simple for the homeowner to get access to that information.
Finally, Honeywell thermostats are among the few thermostats that have been qualified under the National Electrical Manufacturer Association's (NEMA) new ENERGY AWARE™ program. When properly installed and used as directed, Honeywell estimates that homeowner’s can cut annual heating and cooling cost up to 33 percent – or by $200 each year – depending on geographic location.
 |
 |
Fulham introduce Low Frequency Electronic HID Ballast
Fulham's low frequency electronic HID Ballast (22W to 175W) offer improved lumen maintenance that yields opportunities to use either fewer or lower wattage fixtures for additional cost savings. Compact and with faster strike and restrike times than traditional magnetic ballast, the ballasts feature the ability to optimize the lamp as it ages, shutting down automatically at the end of lamp life.
Features:
- Short Circuit and Open Circuit Operation Protection
- Ignitor Failure Protection
- Energy Efficient Compared to Magnetic. Extended Lamp Life
- Less Color Shift Over Time. Superior Lumen Maintenance
- Low Noise HID Ballast
- Compact Ballast Profiles
- Faster Strike and Restrike Times
Fulham Introduces 5-Tap Magnetic HID High Pressure Sodium and Metal Halide Ballasts
Fulham is pleased to announce new 5-tap magnetic HID HPS and Probe Start MH ballasts of voltage range 120, 208, 240, 277 and 480V.
All include a high temperature rated capacitor, an ignitor (where applicable) and mounting brackets (hardware). Dry capacitors are standard on HPS 5-tap models from 250W - 400W, and Probe Start MH 5-tap models from 175W-400W. 1000W HPS and Probe Start MH ballasts are offered with wet capacitors instead.
These new ballasts feature precision wound, vacuum impregnation coils for quiet operation and long life. Wires are color coded and voltage marked for ease of installation.
Starting temperatures are -40C for HPS and -30C for MH. cURus (UL Recognized Components).
All include a high temperature rated capacitor, an ignitor (where applicable) and mounting brackets (hardware). Dry capacitors are standard on HPS 5-tap models from 250W - 400W, and Probe Start MH 5-tap models from 175W-400W. 1000W HPS and Probe Start MH ballasts are offered with wet capacitors instead.
These new ballasts feature precision wound, vacuum impregnation coils for quiet operation and long life. Wires are color coded and voltage marked for ease of installation.
Starting temperatures are -40C for HPS and -30C for MH. cURus (UL Recognized Components).
Subscribe to:
Posts (Atom)